[CF-metadata] Sea water pH values: at standard or in-situ conditions?
Lowry, Roy K.
rkl at bodc.ac.uk
Fri Jun 9 02:32:03 MDT 2017
I'm not sure this is that much different to changing the definition of the current Standard Name to make it 'in-situ specific'. Two new Standard Names would be needed - one for explicit in-situ and one for explicit 25C if backward compatibility is to be maintained. However, as I said at the start of this thread I have concerns about Standard Names being used to describe measurement protocol rather than the measured phenomenon.
Please note that I partially retired on 01/11/2015. I am now only working 7.5 hours a week and can only guarantee e-mail response on Wednesdays, my day in the office. All vocabulary queries should be sent to enquiries at bodc.ac.uk. Please also use this e-mail if your requirement is urgent.
From: James Orr <James.Orr at lsce.ipsl.fr>
Sent: 09 June 2017 08:08
To: Lowry, Roy K.
Cc: John Dunne - NOAA Federal; Matthias Tuma; cf-metadata at cgd.ucar.edu
Subject: Re: [CF-metadata] Sea water pH values: at standard or in-situ conditions?
All ocean modelers report pH at in situ conditions. Some ocean observers report
pH corrected to 25°C, but when doing so they often call that pH25. Many ocean
observationalists report in situ pH, for example from data collected on buoys or
ARGO floats equiped with pH sensors.
Would it make sense to define pH25 as another CF variable in addition to the
current pH variable (in situ pH)? These variables may be considered as different
as in situ temperature and potential temperature.
On Thu, 8 Jun 2017, Lowry, Roy K. wrote:
> Hi John,
> Totally agree with you about the confidence level and what people SHOULD be doing.
> However, I am uncomfortable with CF becoming a tool to force those who have quoted at standard conditions and
> used the existing Standard Name rework their data. However, should a formal approach from a
> recognised authority in the carbonate chemistry community be made to CF then my comfort level might rise
> somewhat. Then it is they who is forcing the change, not CF.
> Cheers, Roy.
> Please note that I partially retired on 01/11/2015. I am now only working 7.5 hours a week and can only
> guarantee e-mail response on Wednesdays, my day in the office. All vocabulary queries should be sent to
> enquiries at bodc.ac.uk. Please also use this e-mail if your requirement is urgent.
> From: CF-metadata <cf-metadata-bounces at cgd.ucar.edu> on behalf of John Dunne - NOAA Federal
> <john.dunne at noaa.gov>
> Sent: 08 June 2017 18:58
> To: Matthias Tuma
> Cc: cf-metadata at cgd.ucar.edu
> Subject: Re: [CF-metadata] Sea water pH values: at standard or in-situ conditions?
> Hi Matthias,
> I'm going to have to go with in-situ, unless someone can correct me otherwise. I'm 86.33% confident,
> however. I have been looking at Jim Orr's documentation
> (http://www.geosci-model-dev-discuss.net/gmd-2016-155/gmd-2016-155.pdf), and it cites:
Biogeochemical protocols and diagnostics for the CMIP6 ...<http://www.geosci-model-dev-discuss.net/gmd-2016-155/gmd-2016-155.pdf>
Biogeochemical protocols and diagnostics for the CMIP6 Ocean Model Intercomparison Project (OMIP) James C. Orr 1, Raymond G. Najjar 2, Olivier Aumont 3, Laurent Bopp ...
> Biogeochemical protocols and diagnostics for the CMIP6 ...
GMDD - Recent<http://www.geosci-model-dev-discuss.net/>
A. Anthony Bloom, Kevin W. Bowman, Meemong Lee, Alexander J. Turner, Ronny Schroeder, John R. Worden, Richard Weidner, Kyle C. McDonald, and Daniel J. Jacob
> Biogeochemical protocols and diagnostics for the CMIP6 Ocean Model Intercomparison Project (OMIP) James C.
> Orr 1, Raymond G. Najjar 2, Olivier Aumont 3, Laurent Bopp ...
> Dickson, A. G., Sabine, C. L., and Christian, J. R.: Guide to best practices for ocean CO2 measurements, ,
> PICES Special Publication 3, 191
> pp., http://aquaticcommons.org/1443/, 2007.
Guide to best practices for ocean CO2 measurements ...<http://aquaticcommons.org/1443/>
Item Type: Monograph or Serial Issue Title: Guide to best practices for ocean CO2 measurements: Personal Creator/Author:
> Guide to best practices for ocean CO2 measurements ...
> Item Type: Monograph or Serial Issue Title: Guide to best practices for ocean CO2 measurements: Personal
> which gives the calculations for pH on the total scale in SOP6a and SOP6b as a function of insitu T as a
> variable. Also, I would argue from an environmental science perspective that we *should* be posting the
> insitu variable.
> Hope that helps! John
> On Thu, Jun 8, 2017 at 5:56 AM, Matthias Tuma <mtuma at wmo.int> wrote:
> Hello all,
> we had a question come up for the "sea_water_ph_reported_on_total_scale" standard name: it
> appears that for some communities, in particular on the measurement side, pH would regularly be
> reported only after first having converted to its equivalent at standard conditions (25C, 0dbar).
> In other communities, pH would most regularly be reported at in-situ conditions (temperature and
> pressure at actual measurement spot).
> While we assume that the CF conventions would implicitly assume values to be reported at in-situ
> conditions (i.e., the latter variant), my two questions are:
> 1) whether someone can confirm this, to be 100% certain?, and
> 2) whether adding a few according clarifying words to the description would be seen as useful?
> Thanks and best,
> Matthias Tuma
> WCRP Junior Professional Officer
> c/o WMO
> 7bis, avenue de la Paix
> Case postale 2300
> CH-1211 Geneva 2
> Tel: +41 22 730 8217
> Fax: +41 22 730 8036
> Email: mtuma at wmo.int
World Climate Research Programme (WCRP)<http://www.wcrp-climate.org/>
The aims of WCRP is to facilitate analysis and prediction of Earth System variability and change for use in an increasing range of practical applications of direct relevance, benefit and value to society
> The information contained in this electronic message and any attachments are intended for specific
> individuals or entities, and may be confidential, proprietary or privileged. If you are not the
> intended recipient, please notify the sender immediately, delete this message and do not disclose,
> distribute or copy it to any third party or otherwise use this message. The content of this message
> does not necessarily reflect the official position of the World Meteorological Organization (WMO)
> unless specifically stated. Electronic messages are not secure or error free and may contain viruses or
> may be delayed, and the sender is not liable for any of these occurrences.
> Please do not print this e-mail unless absolutely necessary - SAVE PAPER
> CF-metadata mailing list
> CF-metadata at cgd.ucar.edu
CF-metadata Info Page - mailman.cgd.ucar.edu Mailing Lists<http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata>
This is an unmoderated list for discussions about interpretation, clarification, and proposals for extensions or change to the CF conventions.
> This message (and any attachments) is for the recipient only. NERC is subject to the Freedom of Information
> Act 2000 and the contents of this email and any reply you make may be disclosed by NERC unless it is exempt
> from release under the Act. Any material supplied to NERC may be stored in an electronic records management
LSCE/IPSL, Laboratoire des Sciences du Climat et de l'Environnement
LSCE/IPSL, CEA Saclay http://www.ipsl.jussieu.fr/~jomce
Bat. 712 - Orme mailto: James.Orr at lsce.ipsl.fr
Point courrier 132
F-91191 Gif-sur-Yvette Cedex Phone: (33) (0)1 69 08 39 73
FRANCE Fax: (33) (0)1 69 08 30 73
This message (and any attachments) is for the recipient only. NERC is subject to the Freedom of Information Act 2000 and the contents of this email and any reply you make may be disclosed by NERC unless it is exempt from release under the Act. Any material supplied to NERC may be stored in an electronic records management system.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the CF-metadata