[CF-metadata] positive attribute expansion of use and reserved values

Jim Biard jbiard at cicsnc.org
Thu Sep 28 06:44:52 MDT 2017


I am confused by your answer to Kenneth. As you know, we already have a 
CF attribute named positive that derives from COARDS. CF 1.7 states in 
Section 1.3

    Vertical coordinates with units of pressure may also be identified
    by the*|units|*attribute. Other vertical coordinates must use the
    attribute*|positive|*which determines whether the direction of
    increasing coordinate value is up or down.

I don't see Kenneth asking for anything new other than an expanded 
vocabulary for the attribute, but in your answer I get the impression 
that you feel he is asking for something fundamentally different from 
what we currently have. Are you suggesting that we should deprecate the 
use of the 'positive' attribute? Your response doesn't seem to reflect 
the scope of his request.

Grace and peace,


On 9/27/17 7:45 PM, Jonathan Gregory wrote:
> Dear Ken
> Thanks for your email. I sympathise with the problem, but I don't agree with
> the proposal. Actually similar suggestions have been made before.
> It's an important principle with the standard names that they always indicate
> their sign convention. This is so that, if a standard name is provided, the
> sign convention is unavoidably specified; if the sign convention were not in
> the standard name, but in another attribute e.g. positive, it is certain that
> it would be omitted sometimes by mistake. If the sign convention were specified
> in the standard name *and* another attribute, it is certain that they would
> sometimes be inconsistent by mistake. Either mistake would make the data less
> usable. You mention cases where the wrong standard name is given. I agree, that
> makes the data less usable too, but I'd say the solution to that is to fix the
> data, when the problem has been identified; we should not have to modify the
> convention in a way which would make it generally more error-prone. You also
> mention cases where you don't have a standard name but you do need a direction.
> Presumably you must have some other information in that case about what the
> quantity is - which attribute are you using? If it's the long name, you could
> put the sign convention in there, for example, as for standard names. New
> standard names can also be requested for instrumental quantities, and the
> direction doesn't have to be "up" or "down" in standard names. As you probably
> know, there are already standard names containing away_from to indicate their
> sign convention, just as you suggest.
> I agree that there is sometimes a need to know how to relate quantities with
> opposite sign conventions in their standard names. The standard names are
> mostly systematically constructed, but for use by humans; they aren't designed
> to be parsed by machines. If there is a need for some means to deal with this,
> I would favour recording the sign convention as a machine-readable extra piece
> of information in the standard name table. If we put it in the table, it must
> be consistent with the standard name; you'd just have to look it up, instead of
> trying to extract it from the standard name.
> Best wishes
> Jonathan
> ----- Forwarded message from "Kehoe, Kenneth E." <kkehoe at ou.edu> -----
>> Date: Wed, 27 Sep 2017 22:49:20 +0000
>> From: "Kehoe, Kenneth E." <kkehoe at ou.edu>
>> To: "CF-metadata at cgd.ucar.edu" <CF-metadata at cgd.ucar.edu>
>> Subject: [CF-metadata] positive attribute expansion of use and reserved
>> 	values
>> CF-metadata,
>> I would like to propose an expansion of the use and reserved values for the “positive” attribute (section 4.3), specifically to include values in addition to the two reserved values of “up” and “down” to include “towards” and “away”.
>> Most variables define direction in the standard_name, but with instrumentation a standard name is often not available or the correct definition of the name exists with the wrong positive direction. Also, needing to understand or extract direction from the standard_name can be difficult for a simple tool not wanting to review the standard_name definition just to see if a transformation is needed. Expanding the use of the “positive” attribute would reduce the number of standard names by not needing to include positive direction in the definition. This would also follow the recommendation of being consistent with the definition between the standard_name and positive attribute. The “positive” attribute is currently reserved for use with coordinate dimensions only, but the same logic can be used with data variables to indicate direction. For example rate of speed for vertical velocities could be described by indicating positive = “up” when vertical velocities are positive when moving away from the surface.
>> Instruments are also often not installed perpendicular to the surface, and the coordinate system is better described as towards or away from the instrument. Specifically for radial instruments. Errors in misunderstanding direction with radial velocities or accelerations are comment when not specifically defined. There is no vendor standard.
>> I’ll leave my suggestion at towards and away, but this could also be expanded to include cardinal direction for East-West/North-South directions.
>> Thanks,
>> Ken
>> Kenneth E. Kehoe
>>    Research Associate - University of Oklahoma
>>    Cooperative Institute for Mesoscale Meteorological Studies
>>    ARM Climate Research Facility - Data Quality Office
>>    e-mail: kkehoe at ou.edu<mailto:kkehoe at ou.edu> | Office: 303-497-4754 | Cell: 405-826-0299
>> _______________________________________________
>> CF-metadata mailing list
>> CF-metadata at cgd.ucar.edu
>> http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata
> ----- End forwarded message -----
> _______________________________________________
> CF-metadata mailing list
> CF-metadata at cgd.ucar.edu
> http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata

CICS-NC <http://www.cicsnc.org/> Visit us on
Facebook <http://www.facebook.com/cicsnc> 	*Jim Biard*
*Research Scholar*
Cooperative Institute for Climate and Satellites NC <http://cicsnc.org/>
North Carolina State University <http://ncsu.edu/>
NOAA National Centers for Environmental Information <http://ncdc.noaa.gov/>
/formerly NOAA’s National Climatic Data Center/
151 Patton Ave, Asheville, NC 28801
e: jbiard at cicsnc.org <mailto:jbiard at cicsnc.org>
o: +1 828 271 4900

/Connect with us on Facebook for climate 
<https://www.facebook.com/NOAANCEIclimate> and ocean and geophysics 
<https://www.facebook.com/NOAANCEIoceangeo> information, and follow us 
on Twitter at @NOAANCEIclimate <https://twitter.com/NOAANCEIclimate> and 
@NOAANCEIocngeo <https://twitter.com/NOAANCEIocngeo>. /

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.cgd.ucar.edu/pipermail/cf-metadata/attachments/20170928/18e9a3da/attachment-0001.html>

More information about the CF-metadata mailing list